healeys
[Top] [All Lists]

[Healeys] Carb shafts

Subject: [Healeys] Carb shafts
From: michael.oritt at gmail.com (Michael Oritt)
Date: Fri, 10 Feb 2017 12:19:53 -0500
All--

Some time back I posted about possibly needing to ream out the carb bodies
and put in oversized shafts.

Due to the fine weather here in the mid-Atlantic I did not get around to
removing the carburetors until yesterday when snow was forecast--and
naturally did not happen.

In any case I disassembled everything this morning and--as many of you
predicted--the wear appears to be confined solely to the sections of the
shafts that pass through the carb bodies. There is a noticeable difference
in feel when I partially withdraw the shafts so they bear on the
non-bearing ends and so I am sure that standard shafts will do the trick.

Thanks as always for the good advice.

Best--Michael Oritt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170210/e2f26eb5/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>
  • [Healeys] Carb shafts, Michael Oritt <=