[Healeys] Fresh air 4" tubing installation tricks

[jwhlyadv at aol.com (Jim Werner)]

Michael,


You can make the ends wider so they slip on easily.  I use a MGB octagon knock 
off tool but you can make something similar out of wood. Basically a V shape 
and as you insert it and gently turn it will "swedge" the duct end to make it 
wider without damaging the duct.


Here is a link to the MGB tool  
https://mossmotors.com/wheel-knockoff-wrench-octagonal-knockoffs



Jim Werner





-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20180618/d7fed799/attachment.html>