Re: [Healeys] adjusting generator belt

[Frank Magnusson <fmags@cox.net>]

Thanks for all the suggestions. 

 I ended up just pulling on the gen and tightening the adjusting bolt while 
lifting up on it.  Forgot it was that simple.  Seemed to work fine and probably 
what I've done before, but its been awhile since I last did it.  As far as 
tension, I just tensioned it roughly to what I've always done; agree not too 
loose but not too tight.

Thanks,
Frank

Sent from my iPad
_______________________________________________

Archive: http://www.team.net/pipermail/healeys

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys