--===============2868586513868312237==
boundary="=_ab93a90d-fb5a-4f87-bed7-358277b36e59"
--=_ab93a90d-fb5a-4f87-bed7-358277b36e59
Content-Transfer-Encoding: 7bit
Please disregard this message below--I have figured it out. I had to bleed the
masters first before any fluid would come into themtom
----- Original Message -----
From: Tom Felts <tomfelts@windstream.net>
To: healeys@autox.team.net
Sent: Wed, 20 Feb 2019 17:45:32 -0500 (EST)
Subject: Clutch and brake pedal issue
body {height: 100%; color:#000000; font-size:12pt; font-family:arial,
helvetica, sans-serif;}OK---so, I have replaced the clutch master and slave
with new units from HS. I have looked at the brake master and it is clean as a
pin. All lines to both systems are tight and there is new fluid in the
cannister.
Pumping the brake and clutch pedals as much as I can i can build up no
pressure at all in either. I had filled the cannister before
starting----and---I see no decrease in fluid level in it after pumping the
pedals.
Is it possible that the cannister is clogged up and won't let fluid get to the
masters? Other that that, I'm stumped as to why I can build up no resistance
in either system.
Any thoughts?
thankstom
--=_ab93a90d-fb5a-4f87-bed7-358277b36e59
Content-Transfer-Encoding: quoted-printable
<html><head><style> body {height: 100%; color:#000000; font-size:12pt; font=
-family:arial, helvetica, sans-serif;}</style></head><body><div>Please disr=
egard this message below--I have figured it out. I had to bleed the m=
asters first before any fluid would come into them</div><div>tom</div><div>=
<br></div><div>----- Original Message -----<br>From: Tom Felts <tomfelts=
@windstream.net><br>To: healeys@autox.team.net<br>Sent: Wed, 20 Feb 2019=
17:45:32 -0500 (EST)<br>Subject: Clutch and brake pedal issue<br></div><di=
v><br></div><style> body {height: 100%; color:#000000; font-size:12pt; font=
-family:arial, helvetica, sans-serif;}</style><div>OK---so, I have replaced=
the clutch master and slave with new units from HS. I have looked at=
the brake master and it is clean as a pin. All lines to both systems=
are tight and there is new fluid in the cannister.</div><div><br></div><di=
v>Pumping the brake and clutch pedals as much as I can i can build up=
no pressure at all in either. I had filled the cannister before star=
ting----and---I see no decrease in fluid level in it after pumping the peda=
ls.</div><div><br></div><div>Is it possible that the cannister is clogged u=
p and won't let fluid get to the masters? Other that that, I'm stumpe=
d as to why I can build up no resistance in either system.</div><div><br></=
div><div>Any thoughts?</div><div><br></div><div>thanks</div><div>tom</div><=
div><br></div></body></html>
--=_ab93a90d-fb5a-4f87-bed7-358277b36e59--
--===============2868586513868312237==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============2868586513868312237==--
|