healeys
[Top] [All Lists]

[Healeys] Banjo Fittings on carbs

To: <fsufan1952@yahoo.com>
Subject: [Healeys] Banjo Fittings on carbs
From: "Robert Begani" <rfbegani@gmail.com>
Date: Fri, 24 May 2019 11:58:32 -0400
Cc: healeys@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
Thread-index: AdUSSYUPvOwzEaN/RbeCGn7FQAN+vA==
Don:

Had the same problem because the banjo fittings need to be oriented properly.  
I am not with my Healey now, but, maybe I can remember.  The flat side of the 
banjo goes to one side other wise they will leak.  Sorry if I cannot be more 
certain.  I would just turn them around.  You do not need gasket sealer if you 
get them oriented correctly. I would not use a gasket sealer on any carb 
fittings

Bob Begani
BJ8 67

-----Original Message-----
From: Healeys <healeys-bounces@autox.team.net> On Behalf Of Don via Healeys
Sent: Friday, May 24, 2019 7:44 AM
To: John Spaur <jmsdarch@sbcglobal.net>
Cc: healeys@autox.team.net
Subject: Re: [Healeys] gasket

Iâ??m working on a BJ-8 right now and Iâ??m having a hard time stopping very 
slight fuel leaking out of the two banjo unions between the carbs . And I 
installed new fiber washers . Would it be ok to try some  gasket sealer on the 
fiber washers ? 
         Don       67 BJ-8 

Sent from my iPhone

> On May 24, 2019, at 2:07 AM, John Spaur <jmsdarch@sbcglobal.net> wrote:
> 
> Gasket sealer is almost always required when installing gaskets.
> 
> John Spaur
> San Jose, CA
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html Suggested annual 
> donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys 
> http://autox.team.net/archive
> 
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/fsufan1952@yahoo.com
> 

_______________________________________________
Support Team.Net http://www.team.net/donate.html Suggested annual donation  
$12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/rfbegani@gmail.com


_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>
  • [Healeys] Banjo Fittings on carbs, Robert Begani <=