Hi Fred,
I got into these sizes last year because I took my servo out (long story)â?¦my
notes say that the 7/8â?? bore is with servo.
You can get good quality replacement masters from Pegasus racing- they say they
are genuine Girling.
Good luck,
Stephen, BJ8
> On Jun 2, 2020, at 2:33 PM, Fred Wescoe <fredwescoe@gmail.com> wrote:
>
> Listers,
>
> I took the car out for a nice long drive this morning (100+ miles round
> trip). About 15 miles from home, on the way back, the brake pedal slowly
> went to the floor. A quick pump and the brakes stopped the car without a
> problem.
>
> So now I need to repair/replace the master cylinder. What size cylinder bore
> do I have? The car is a 1964 BJ8, MK III with the brake booster. The
> chassis number is 29009. Do I have a 78" or a 3/4" bore. My manual does not
> indicate the bore size.
>
> Should I repair or replace it? I am inclined to repair if there are quality
> parts available. It seems that a quality master cylinder replacement is not
> readily available.
>
> Thanks for some sound advice,
>
> Fred Wescoe
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/s.hutchings@rogers.com
>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net
|