--===============2694480480829061806==
--0000000000004ddeef05b3a16a4e
Listers,
I helped Roger Moment make the ones for my car many years ago, and
here's the process...
Roger machined a billet aluminum cylinder the correct diameter and then had
the correct spiral machined into the surface. The depth of the machined
spiral was half the diameter of the wire.
He then would the proper gauge wire into the groves of the cylinder and
secured the ends.
Then he found a thin light brown paper and cut it to size, and then soaked
it in a solution of warm water and "Elmers" glue.
Before wrapping the paper around the cylinder he sprayed it with a coating
of WD-40.
After wrapping the paper onto the cylinder, he then wound a soft braided
nylon cord in between the spirals of the wire to hold the form.
Then hang it up to dry.
Once dry, the tube can be screwed off of the cylinder. The WD-40 aids in
this process.
Done and perfect!
On Sun, Nov 8, 2020 at 5:16 AM Michael Salter via Healeys <
healeys@autox.team.net> wrote:
> Hi Alan,
> Roger Moment figured out a way to make those and may be able to help.
> Before I found that he could supply them I considered wrapping paper
> tape( the kind used for sealing boxes) around a pipe with the adhesive out.
> Then wind the wire tightly.
> Then apply an outer layer of the same tape, adhesive in, wound in the
> opposite direction.
> I've never tried it but intend to do so next time I need some.
>
> M
>
> On Sun., Nov. 8, 2020, 7:11 a.m. Kent McLean, <kentmclean@comcast.net>
> wrote:
>
>> Alan Seigrist wrote:
>>
>> Does anyone have a good method for bonding the paper on the demister
>> hoses? I?m assuming I can just use brown paper from a shopping bag but
>> would like some advise as to what sort of wet adhesive to use.
>>
>>
>> You could try rubber cement, which should be flexible but would be a bear
>> to align as you roll the paper; once rubber cement touches itself, it'll
>> stick. As for paper, I have some brown painter's paper in a long roll from
>> the local home center. It is meant to take the paint and not bleed through.
>> That might be useful with glue. I'd do a test run of the materials before
>> applying it to the real thing.
>>
>> Kent McLean
>> 1956 100 BN2
>>
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>>
>> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
>
>
--0000000000004ddeef05b3a16a4e
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr"><div>Listers,</div><div><br></div>I helped=C2=A0Roger Mome=
nt make the ones for my car many years ago, and here's=C2=A0the process=
...<div><br></div><div>Roger machined a billet aluminum cylinder the correc=
t diameter and then had the correct spiral machined into the surface.=C2=A0=
The depth of the machined spiral=C2=A0was half the diameter=C2=A0of the wi=
re.</div><div><br></div><div>He then would the proper gauge=C2=A0wire into =
the groves of the cylinder and secured the ends.</div><div><br></div><div>T=
hen he found a thin light brown paper and cut it to size, and then soaked i=
t in a solution=C2=A0of warm water and "Elmers" glue.</div><div><=
br></div><div>Before wrapping=C2=A0the paper around the cylinder he sprayed=
it with a coating of WD-40.</div><div><br></div><div>After wrapping the pa=
per onto the cylinder, he then wound a soft braided nylon cord in between t=
he=C2=A0spirals of the wire to hold the form.</div><div><br></div><div>Then=
hang it up to dry.</div><div><br></div><div>Once dry, the tube can be scre=
wed off of the cylinder.=C2=A0 The WD-40 aids in this process.</div><div><b=
r></div><div>Done and perfect!=C2=A0</div><div><br></div><div><br></div></d=
iv><br><div class=3D"gmail_quote"><div dir=3D"ltr" class=3D"gmail_attr">On =
Sun, Nov 8, 2020 at 5:16 AM Michael Salter via Healeys <<a href=3D"mailt=
o:healeys@autox.team.net">healeys@autox.team.net</a>> wrote:<br></div><b=
lockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-le=
ft:1px solid rgb(204,204,204);padding-left:1ex"><div dir=3D"auto">Hi Alan,<=
div dir=3D"auto">Roger Moment figured out a way to make those and may be ab=
le to help.</div><div dir=3D"auto">Before I=C2=A0 found that he could suppl=
y them I considered wrapping paper tape( the kind used for sealing boxes) a=
round a pipe with the adhesive out.=C2=A0</div><div dir=3D"auto">Then wind =
the wire tightly.</div><div dir=3D"auto">Then apply an outer layer of the s=
ame tape, adhesive in, wound in the opposite direction.=C2=A0</div><div dir=
=3D"auto">I've never tried it but intend to do so next time I=C2=A0 nee=
d some.</div><div dir=3D"auto"><br></div><div dir=3D"auto">M</div></div><br=
><div class=3D"gmail_quote"><div dir=3D"ltr" class=3D"gmail_attr">On Sun., =
Nov. 8, 2020, 7:11 a.m. Kent McLean, <<a href=3D"mailto:kentmclean@comca=
st.net" target=3D"_blank">kentmclean@comcast.net</a>> wrote:<br></div><b=
lockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-le=
ft:1px solid rgb(204,204,204);padding-left:1ex"><div style=3D"overflow-wrap=
: break-word;">Alan Seigrist wrote:<br><div><blockquote type=3D"cite"><span=
style=3D"font-family:Palatino-Roman">Does anyone have a good method for bo=
nding the paper on the demister</span><br><div><span style=3D"font-family:P=
alatino-Roman;font-size:18px;font-style:normal;font-variant-caps:normal;fon=
t-weight:normal;letter-spacing:normal;text-align:start;text-indent:0px;text=
-transform:none;white-space:normal;word-spacing:0px;text-decoration:none;fl=
oat:none;display:inline">hoses?=C2=A0 I?m assuming I can just use brown pap=
er from a shopping bag but</span><br style=3D"font-family:Palatino-Roman;fo=
nt-size:18px;font-style:normal;font-variant-caps:normal;font-weight:normal;=
letter-spacing:normal;text-align:start;text-indent:0px;text-transform:none;=
white-space:normal;word-spacing:0px;text-decoration:none"><span style=3D"fo=
nt-family:Palatino-Roman;font-size:18px;font-style:normal;font-variant-caps=
:normal;font-weight:normal;letter-spacing:normal;text-align:start;text-inde=
nt:0px;text-transform:none;white-space:normal;word-spacing:0px;text-decorat=
ion:none;float:none;display:inline">would like some advise as to what sort =
of wet adhesive to use.</span></div></blockquote><br></div><div>You could t=
ry rubber cement, which should be flexible but would be a bear to align as =
you roll the paper; once rubber cement touches itself, it'll stick. As =
for paper, I have some brown painter's paper in a long roll from the lo=
cal home center. It is meant to take the paint and not bleed through. That =
might be useful with glue. I'd do a test run of the materials before ap=
plying it to the real thing.</div><div><br></div><div>Kent McLean</div><div=
>1956 100 BN2</div><div><br></div></div>___________________________________=
____________<br>
rer noreferrer" target=3D"_blank">http://www.team.net/donate.html</a><br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/healeys"; rel=3D"noreferre=
r noreferrer" target=3D"_blank">http://www.team.net/pipermail/healeys</a> <=
a href=3D"http://autox.team.net/archive"; rel=3D"noreferrer noreferrer" targ=
et=3D"_blank">http://autox.team.net/archive</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net"; rel=3D"noreferrer" target=3D"_bla=
nk">Healeys@autox.team.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys"; rel=3D"noreferre=
r noreferrer" target=3D"_blank">http://autox.team.net/mailman/listinfo/heal=
eys</a><br>
<br>
s/michaelsalter@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank">=
http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com</a><b=
r>
<br>
</blockquote></div>
_______________________________________________<br>
rer" target=3D"_blank">http://www.team.net/donate.html</a><br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/healeys"; rel=3D"noreferre=
r" target=3D"_blank">http://www.team.net/pipermail/healeys</a> <a href=3D"h=
ttp://autox.team.net/archive" rel=3D"noreferrer" target=3D"_blank">http://a=
utox.team.net/archive</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net"; target=3D"_blank">Healeys@autox.t=
eam.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys"; rel=3D"noreferre=
r" target=3D"_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
s/cnaarndt@gmail.com" rel=3D"noreferrer" target=3D"_blank">http://autox.tea=
m.net/mailman/options/healeys/cnaarndt@gmail.com</a><br>
<br>
</blockquote></div>
--0000000000004ddeef05b3a16a4e--
--===============2694480480829061806==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============2694480480829061806==--
|