Does anyone know if the current Eezibleed Kit includes a cap that will
fit the Girling reservoirs on BN1 & 2s? I know there is a brute force
method of buying a spare cap ($22 from Moss) and drilling a 13mm hole
in it for Gunson's plumbing.
-Roland
On Thu, 18 Mar 2021 09:38:17 +0800, you wrote:
>The vacuum hand pumps don't work well with drum brakes, especially on the
>100. Better to go with ezibleed.
>
>
>On Thu, Mar 18, 2021 at 3:49 AM Kees Oudesluijs via Healeys <
>healeys@autox.team.net> wrote:
>
>> Bob,
>>
>> I have used a Gunson Eezibleed Kit for donkeys years. The first kit was
>> bought around 1965, later was ones followed as these were constantly
>> improved upon. However you can improvise on this with a bicycle inner tyre.
>>
>> Basically you pressurize the brake fluid reservoir and open the bleed
>> nipples one by one until clear and bubble free liquid appears. You need
>> to get used to the system to avoid spillages and you have to top up the
>> brake fluid reservoir after flushing each line.
>>
>> Others use a vacuum hand pump to draw the fluid through the bleed nipples.
>>
>> Kees Oudesluijs
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|