Given everyones info; a Ring and Pinion of 1.1 to 1.2 would be close if
the 650/16 tire works out to be about 29" which mine do. RPM in the mid
6000's gets this close using "gear calc" and their 3rd gear ratio. 400
mph with minimal slip rpm was still possible at 7000 with those
This communication is for use by the intended recipient and contains
information that may be privileged, confidential or copyrighted under law. If
you are not the intended recipient, you are hereby formally notified that any
use, copying or distribution of this e-Mail, in whole or in part, is strictly
prohibited. Please notify the sender by return e-Mail and delete this e-Mail
from your system. Unless explicitly and conspicuously stated in the subject
matter of the above e-Mail, this e-Mail does not constitute a contract offer, a
contract amendment, or an acceptance of a contract offer. This e-Mail does not
constitute consent to the use of sender's contact information for direct
marketing purposes or for transfers of data to third parties.
This email has been scanned for all viruses by the MessageLabs service.