Great information Jon.
Also a great example of how easy it can be to out trick myself.
I had some liquid soap that dried on a screwdriver. I have a
small can of odor less paint thinner on the bench, I took the lid
off swished the screw driver around and -- nothing. The soap
was still there. Tried a bit of gas from the chain saw -- again,
no effect on the dried soap. Water seemed to work just fine.
I would be careful not to dull the edges of the barb's.
Jon Amo wrote:
> Do you think engineers made the hose to leak if used properly?
> By the way if you use the blue hose with the proper barbed fittings,
> aeroquip states you DO NOT need a clamp, if one is used it has a chance to
> instead of contaminating it with a sealer like permatex they suggested and
> worked very very well is dawn dish liquid.