Cast Iron Block Welding - not strictly LSR

land-speed

Cast Iron Block Welding - not strictly LSR

from [Dick J]

To:	lsr list autox <land-speed@autox.team.net>
Subject:	Cast Iron Block Welding - not strictly LSR
From:	Dick J <lsr_man@yahoo.com>
Date:	Sun, 24 Sep 2006 12:39:26 -0700 (PDT)

I need to fill a stripped hole in the block on my farm tractor, and then 
re-drill and tap a new one.  I no longer have an arc welder.  Is there such a 
thing as high-nickel wire for a mig welder which would allow me to do this job 
with my mig using CO2/Argon mix?
   
  Dick J

                
---------------------------------
How low will we go? Check out Yahoo! Messengers low  PC-to-Phone call rates.

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Cast Iron Block Welding - not strictly LSR, Dick J <= Re: Cast Iron Block Welding - not strictly LSR, Doug Odom Re: Cast Iron Block Welding - not strictly LSR, Askotto Re: Cast Iron Block Welding - not strictly LSR, Keith Turk

Previous by Date:	To our mates in Australia (NON LSR), Bryan Savage
Next by Date:	Re: Wisdom of the List --- Oil Pump, Bryan Savage
Previous by Thread:	To our mates in Australia (NON LSR), Bryan Savage
Next by Thread:	Re: Cast Iron Block Welding - not strictly LSR, Doug Odom
Indexes:	[Date] [Thread] [Top] [All Lists]