land-speed
[Top] [All Lists]

Re: [Land-speed] Wiring and Fuses

To: "'Dick J'" <lsr_man@yahoo.com>, "'lsr list autox'"
Subject: Re: [Land-speed] Wiring and Fuses
From: <neil@dbelltech.com>
Date: Sun, 28 Oct 2007 17:31:01 -0700
List;

Since this subject has come up a couple times recently, I looked up some
recommended circuit breaker (CB) info in "Aircraft & Missile Design &
Maintenance Handbook" by Charles Overbey.

The criterion for selecting a CB is to open the circuit before the wire
begins to emit smoke. Here are those recommendations:

Copper Wire Size  Circuit Breaker (amps)

#22 & #20               5
#18                     10
#16                     15
#14                     20
#12                     25 or 30
#10                     35 or 40
#8                      50
#6                      80
#4                      100
#2                      125

Bear in mind that wire temperature will be higher if it is enclosed or
bundled into a cable. These ratings are only for CB protection of the wiring
itself, not how big a wire you should use for a particular load current. 

I hope this may be helpful.

Regards, Neil  Tucson, AZ
_______________________________________________

Land-speed mailing list

http://autox.team.net/mailman/listinfo/land-speed

<Prev in Thread] Current Thread [Next in Thread>