My 53 TD had a heater installed when I got it. One connection was hosed to a
branch fitting at the radiator hose, and the other was to a fitting soldered
to this rear head plate. Not sure which was the supply and return to the
1967 Austin Healey 3000
----- Original Message -----
From: "Bill Snyder" <email@example.com>
To: "MG T List" <firstname.lastname@example.org>
Sent: Monday, August 29, 2005 11:01 AM
Subject: Cover plate fitting, Rear of TD Engine
> On the rear of my '53 TD engine, there is a 90 degree brass elbow
> pipe/hose fitting protruding from the rear engine cover plate. It points
> left toward the driver's side.
> Can anyone enlighten me as to what connects to this fitting, where it
> travels to, and what is its purpose?
> Thanks again in advance.
> Bill Snyder
> Waynesville, NC
> '53 TD under construction
> '66 MGB
/// unsubscribe/change address requests to email@example.com or try
/// Archives at http://www.team.net/archive/mg-t