Exiting from the back plate on the cylinder head, and returning to the
water branch pipe. A fitting had to be drilled and tapped, or welded to
the branch pipe. The later production run TF 1500 had a plugged drilled
and tapped boss on the water outlet housing, next to the temperature
probe location, and a second plugged boss on the water outlet pipe.
John Seim
Irvine, CA
WCAHKA@wmconnect.com wrote:
>I understand that a T heater can be connected differently than the two hoses
>coming from the bypass as given in the Moss writeup. One hose comes from a
>modified plate on the back of the head that has an oulet added and the other
>comes from I do not know where. Perhaps a different fitting on the bypass. Any
>comments?
>Bill Abbott
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|