Not sure where the bulge is, but...If it's the one in the left valence it is
to accommodate the generator/pulley. The generator can be pivoted outward to
tension the belt. Sometimes that calls for an adjustment that goes beyond the
lines of the valence when closed.
Syd
Sent from my iPhone
> On Jul 7, 2014, at 10:19 AM, <wbeech@flash.net> wrote:
>
> Dear List,
>
> Have a friend that has just acquired a TD Mk II (7,500 miles). The
question
> is that there is a bulge on the left-side bonnet with no reason for it in
> the motor bay. Cannot find any pictures or accessories that would explain
> this need.
>
> Also, are there readable numbers on the head to confirm that this is indeed
> the higher performance MK II head?
>
> Any thoughts are, of course, greatly appreciated.
>
> All the best,
> Bill
> ______________________________________________
>
> Mg-t@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/mg-t/tcsyd@sbcglobal.net
______________________________________________
Mg-t@autox.team.net
Archive: http://www.team.net/archive
|