mgb-v8
[Top] [All Lists]

my mgb A/C installation (so easy!)

To: "'john peloquin'" <peloquin@galaxy.ucr.edu>, "'MG V8 Mailing List'" <mgb-v8@Autox.Team.Net>, "'MG mail list'" <mgs@Autox.Team.Net>
Subject: my mgb A/C installation (so easy!)
From: "Mike Cousins" <Mike.Cousins@wsnelson.com>
Date: Thu, 13 Aug 1998 14:17:45 -0500
Importance: Normal
In-reply-to: <Pine.SOL.3.95.980813084559.6417C-100000@galaxy.ucr.edu>
Reply-to: "Mike Cousins" <Mike.Cousins@wsnelson.com>
Sender: owner-mgb-v8@Autox.Team.Net
Well, someone gave me the compressor and the evaporator unit that goes up
under the dash.  I had to do some work on both to get them in reasonable
shape.  Then I bought a condenser from J.C. Whitney - awesome 4 row aluminum
condenser that is only 7/8" thick !!!  It fit perfectly between the radiator
and the fans on my '77 B.  ($65)  then I bought a standard drier with sight
glass for about $45 ( I think )  Then I had a couple of A/C lines made up
for me at the local A/C place down here in New Orleans ($40)  I had a small
supply of R12 left over from before it was banned.  So, it only cost me
about $150 plus some good luck and a little hard work, but it was worth it -
It's ice cold, and the little Sanden compressor really doesn't drag the 4
banger that much.  P.S. I fabricated the compressor mounting brackets
myself - easy.

That's it.   The real key to the whole installation was the condenser I got
from J.C. whitney  --get one now !!!! -  the thing fits so perfectly between
the radiator and fans!   Now when I drop in the Rover 3500 I dont have to
back it up for A/C (this saves a few hundred bucks and a lot of unnecessary
transmission modifications.

P.S. I could look up the J.C. whitney part # if you want it.

Cheers

-----Original Message-----
From: john peloquin [mailto:peloquin@galaxy.ucr.edu]
Sent: Thursday, August 13, 1998 10:47 AM
To: Mike Cousins
Subject: RE: Books


Dear Mike,

How did you get AC in your B for only $150????!!!!

"Never Ascribe to Malice that which can be explained by Ignorance."
John J. Peloquin
Entomology, University of California, Riverside, CA 92521

On Thu, 13 Aug 1998, Mike Cousins wrote:

> I also installed an airconditioning system in the B for a total of $150
!!!
>
> If I would have taken Glen Towery's advice I probably would be spending
> thousands of dollars.
> There are, however no shortcuts for some things, though, like the
driveshaft
> and the headers.  Just save up your $$$ .
>
> Being an engineer, I just wish I could find more technical drawings with
> exact dimensions, etc....
>


<Prev in Thread] Current Thread [Next in Thread>