For a year or so I ran an HEI dizzy from a Buick 350, 1978? in my 215. Just
bolted in, no change to drive gear or anything else, so I would guess that any
Buick small block v8 points dizzy would fit.
D & D lists a rebuilt dizzy with cap, points, rotor, condenser, vac advance for
$75.00.
Jim Stuart
Wake074@aol.com wrote:
> Mike,
>
> That is odd, as I purchased my rebuilt distributor at the local Advance
> Autoparts, for less than 50 bucks, no core. It included points, but didn't
> have a cap or rotor. If you'd like, I think I may still have the box at the
> house that has the AAP number on it. Let me know if you'd like the number,
> and I'll post it tonight.
>
> Glenn
> http://members.aol.com/wake074/mgbv8.html
>
> In a message dated 6/20/00 1:45:26 PM Eastern Daylight Time,
> mhartwig@midsouth.rr.com writes:
>
> << I can't believe that none of the local parts stores (Napa, Autozone,
> and Advanced) and even the buick dealer cannot get me a 215
> distributor. Will any of the other engine sizes fit? (300, etc) I
> also need the distributor drive gears. Anyone have a source for that?
> I imagine that D&D would have them, but I want to compare prices
> first. I'd rather not go with a Mallory, because as soon as the
> engine is running well, i'm going to crank triggered, direct ignition.
>
> Thanks
> Mike >>
|