As usual, you hit it right on the head. I put this
together last week, and it definitely helped with the
breathing and the oil leaks. At least now it is down
to just a couple of small drips. A much more
--- Jim Stuart <firstname.lastname@example.org> wrote:
> I removed the small "mushroom" fitting & tapped the
> hole for 1/4" pipe,
> added a 90` fitting & an in line pvc fitting to the
> center large pipe on the
> front of the Edelbrock. One flame trap was cleaned
> out & a rubber line run
> to the base of the air cleaner. This provides clean
> air intake to the sump,
> the pvc is the outlet vent. All nice & clean, &
> politically correct.
The New Yahoo! Search - Faster. Easier. Bingo.
/// email@example.com mailing list
/// Send admin requests to firstname.lastname@example.org
/// Send list postings to email@example.com
/// Edit your replies! If they include this trailer, they will NOT be sent.