In the morning, when the engine is "cold", remove the air cleaner and
energize the choke by turning the ignition to "on" (not start) and press
the accelerator once. The choke valve should close. Start the engine
and let it warm. After a specified time the choke valve should open.
Charles E. Edwards, CPA
Virginia Beach, VA
cedwards@pinn.net
On 22 Aug 1995, John Famolaro wrote:
> I have got a 77 MGB with a weber carb (model 32/36 DGAV-33B1) with a electric
> choke. What do I need to do to check the that the electronic choke is
> working.
> Would like to verify that soleniod is opperating properly. All input is
> greatly appreciated.
>
>
> Thanks
> John Famolaro
>
>
|