Re: DOT4 and DOT5

[jtilton@vt.edu (Jay Tilton)]

MGBCHRIS@aol.com wrote:
>I found that on my
>rack ('77 B) that there is a small access cover on the housing directly above
>where the steering column connects to the rack.  Removal of this cover
>revealed some shims, and a rubber seal.  I added fluid at this point.

That's a perfectly acceptable (even recommended) way to get fluid into the
rack.  There should have been a few additional pieces in the damper
assembly (yoke, spring, piston).
--
Jay Tilton  |  jtilton@vt.edu