mgs
[Top] [All Lists]

Re: midget to mgb spare

To: GOFASTMG@aol.com
Subject: Re: midget to mgb spare
From: todd@nutria.nrlssc.navy.mil (Todd Mullins)
Date: Tue, 4 Mar 1997 13:18:24 -0600 (CST)
GOFASTMG@aol.com writes:

>   But, You could still use the 13 for a spare on the B (or 14 on the TR6 (or
> better yet, leave the TR6 on the side of the road)).  If you had a flat on
> the front, put a rear on the front, and run the 13 on the rear.

Nope.  Not for any distance.  This is exactly what I was referring to in
my previous message.  Differing tire diameters on the driven axle
overworks the differential, sometimes with disastrous results.  If you
have a limited-slip it's even more grevious.

I have heard unconfirmed reports of complete differential failure in
such cases, sometimes even involving halfshaft separation!  If you MUST
do this, drive slowly and proceed directly to a tire shop.

(And let's drop the marque-bashing, shall we?)

-- 

Todd Mullins
Todd.Mullins@nrlssc.navy.mil    On the lovely Mississippi (USA) Coast

'74 MGB Tourer in pieces (but getting there)
'72 MGB Tourer parts-o-rama

"I could go at any time..."

<Prev in Thread] Current Thread [Next in Thread>