Hello John:
The so called drain tap at the rear of the block is very seldom usable.
When they cast the block, a lot of them were plugged with good old British
cast iron. The best and usually the only way to drain a B engine is to
loosen the lower radiator hose and drain from there. It is lower than the
block, and works quite well.
Cheers:
Skip..........At 08:48 AM 5/24/97 -0400, John Middlesworth wrote:
>I have the 18V engine in my '72. How do I drain the coolant out of the
>block? I'll be darned if can find a tap or a plug or anything.
>
>John Middlesworth
>
>
>
|