Midget Clutch Master Cylinder

[Mark Endicott <endicott@bellsouth.net>]

It's 7:30 AM and I am sitting here looking at the bore of the clutch
master cylinder from my 70 Midget.  It's the small separate one unlike
the dual MC on the earlier cars. The interior wall has some wear on the
bottom part in the front of the bore, the deeper internal surface looks
OK.  I wonder if these can be honed or otherwise polished and rebuilt,
since I have the kit.  My gut says it's too far gone, anybody found one
at a chain parts store like NAPA?

Mark
70 Midget
Nashville