Steve Tritle wrote:
> John H. Gindlesberger wrote:
> >
> > In getting ready to tune my TD, I referred to the manual and found
> that the
> > recommended plug gap is only .020 to .022. The seems rather close.
> Also,
> > timing is to be set at TDC. In light of the recent discussion
> regarding
> > timing for the MGB engine, would be be beneficial to advance the
> timing
> > somewhat? Experience/ideas?
> John, I time my 52 TD at TDC and set the plug gap to .025. I use
> either
> champion L82C or hotter L86C plugs. New #'s are 811 and 830.
>
> Steve
> 52TD
Steve,
Are those 1/2 in. reach plugs or 3/4in. reach? Isn't your TD a 52?
I think that John's may be a 53 with the later head. John, if you're
reading this, see which head you have on your TD before you buy your
plugs.
Bud Krueger
52TD
|