In a message dated 98-04-01 17:21:02 EST, code5@ibm.net writes:
<< R.--
Went to look at the Lincoln Weldpack 100/gas kit you referred to at Home
Depot and ran into the Lincoln 155 that runs on 230v/20A--total with gas
kit around $560 & change. I think it's less likely to trip the breaker
on the 240v circuit than the 100 amp machine will on the 120v/20A
circuit.
I gotta think about this some more...
Thanks again for the advice.
John V. >>
John,
I recommend that you run the welder on a dedicated, 25 amp circuit. If you do
this, you won't have any tripping probem
R. Johnson - Dallas
|