On Tue, 07 Apr 1998 08:50:38 EDT richard.arnold@juno.com (Richard D.
Arnold) writes:
>"Thanks!" to everyone who responded with a suggestion on where to look
>for windscreen leaks on Miss Molly: Steve Byer and Chris Kotting, and
>anyone else who may sent a suggestion. The consensus seems to be to
>check:
>
> (a) windscreen to frame;
> (b) frame to body;
> (c) wiper arm mounting holes; and the
> (d) washer jet mounting holes.
>
>Also like to thank Guy Weller (UK) and Mike (mymgmidget@aol.com) for
>further suggestions and comments on the oil pressure light flickering.
> Guy noted that Dave Vizard suggests replacing the oil pressure valve
>with a ball bearing, but didn't know the size. Has anyone ever tried
>this? What size bearing was used?
9/16" steel ball bearing. Check with the local bearing supplier (Timken,
etc) They usually have them.
Rick Morrison
72 MGBGT
74 Midget
|