mgs
[Top] [All Lists]

Re: Can You Identify This Aluminium Part # ACH 8472

To: MGCTONY <MGCTONY@aol.com>
Subject: Re: Can You Identify This Aluminium Part # ACH 8472
From: Kevin Sullivan <kevins@khoral.com>
Date: Thu, 23 Apr 1998 09:04:28 -0600 (MDT)
On Thu, 23 Apr 1998, MGCTONY wrote:

> i own what appears to be an aluminium "plenum"(carberator air filter assembly)
> for a very , very, early mg.
> 
> it is made of cast alloy, raised mg logo on the front, connects  2  one and
> one half inch carbs with 7 1/2" between center to center, looks as if a air
> filter box would fit on the rear section ("T" shaped )(has round rubber gasket
> as well) looks like a small loaf of italian bread fom the front
> 
> on the underside the factory number are raised : ACH 8472

ZA or early ZB Magnette?  Sounds like the one on my '57 but it's at home
so I can't check the part number.

Kevin Sullivan             kevins@khoral.com
Khoral Research Inc.       www.khoral.com/staff/kevins/mgstuff
Albuquerque NM USA 

1960 MGA           "Baby"
1957 Magnette ZB   "Pup"
1959 Magnette ZB   "P2"


<Prev in Thread] Current Thread [Next in Thread>