I measured my 77 and this is what I got... from the bottom of the
molding strip measure down 1 3/8".This will be where the top of the emblem
should be. From the edge of the fender measure over 1 1/8" this is where
the left edge of the emblem should be.
...Art
On Wed, 13 May 1998, Kevin Richards wrote:
> Listers,
>
> I am in the final stages of restoring my 77B.
> I bought the British Leyland emblem for the right (pass) side fender,
> but since I don't have the old fender OR the old emblem, I don't have a
> reference as to where exactly it goes.
> I'm eager for a lister with a similar year MGB to measure where the
> emblem falls (roughly), I'm not looking for millimeters here, just X
> inches from the fender seam down and X inches from the leading edge of
> the passenger door, etc
>
> TIA
>
> Kevin Richards
> 77B
> 67B parting out.
>
|