mgs
[Top] [All Lists]

Re: 1969 MGB wheel bearing problem

To: bwatson@bayflash.stpt.usf.edu, ch155@freenet.buffalo.edu
Subject: Re: 1969 MGB wheel bearing problem
From: RJohn50603@aol.com
Date: Wed, 14 Oct 1998 07:11:40 EDT
In a message dated 10/13/98 1:44:40 AM Central Daylight Time,
bwatson@bayflash.stpt.usf.edu writes:

<< I recently burned one of my bearings so badly that I was able to take the
 bearings out with a pair of needlenose pliers (they were far from round)
 and thus remove the hub.  Then I used a Dremmel rotary tool to cut through
 the bearing housing that was seized to the spindle, then wack it off with
 a large screwdriver and a BFH.  
 
 Hope this might give an idea.
 
                                 ******************************* 
                                Berrie C. Watson        
                                Assistant in Campus Computing
                                USF St. Petersburg Campus
                                bwatson@bayflash.stpt.usf.edu >>

Berrie,

"Never use force, get a bigger hammer" is what the chief engineer at a radio
station I worked at about 30 years ago used to say. Enjoyed your "BFH".

R. Johnson - Dallas

<Prev in Thread] Current Thread [Next in Thread>