mgs
[Top] [All Lists]

Re: Lowered front springs

To: "Lightmkr" <Lightmkr@email.msn.com>, "Autotox" <mgs@Autox.Team.Net>
Subject: Re: Lowered front springs
From: "Paul Hunt" <paul.hunt1@virgin.net>
Date: Sat, 5 Dec 1998 15:21:52 -0000
I've been able to change standard springs without using a spring
compressor - just a trolley jack under the spring-pan while the car is
supported on axle stands.  Lowered springs would be even easier.

PaulH.
-----Original Message-----
From: Lightmkr <Lightmkr@email.msn.com>
To: Autotox <mgs@autox.team.net>
Date: 05 December 1998 05:18
Subject: Lowered front springs


>Hi All,
>I Just received my lowered front coil springs. THANKS ED!!!!
>When I set them in the pans I can almost pull them up by hand to connect
the
>top swivel axle bolt. Is this normal? I would expect more preload. I only
>have to compress them with the spring compressors about 1/2 inch. Any
>thought would be appreciated.
>Thanks,
>John (77MGB) With a new front end
>
>
>
>


<Prev in Thread] Current Thread [Next in Thread>