Rick, thanks for the comments on the powder coat system.
I know that colors are hard to explain on the internet but could you comment on
the following. Using Moss' color as a base; is the Eastwood color more brown or
more red? I wouldn't know if their color really fits either of these categories
but I the more brown/more red issue is generally the typical color shift you see
with maroon paint.
Thanks for any help.
Larry Hoy
http://home.cwix.com/~larryhoy@cwix.com/
> -----Original Message-----
> From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net]On
> Behalf Of Rick Brown
> Sent: Thursday, February 04, 1999 5:05 PM
> To: mgs@autox.team.net
> Subject: Eastwood Powder Coat MG Maroon
>
> Just as we were closing up at Norristown last Sunday the R&D guy from
> Eastwood showed up with a sample of the MG Maroon Powder Coat - he
> sprayed an MG Valve cover - Looked real good - Not quite the same as
> Moss' Maroon - probably not exactly the same colour as the original
> but close enough. He also had a sample of the powder coat system
> which I understands sells for about $150 - says they have already sold
> over 6,000 units.
>
> I think it was one of the list members in OZ that wanted someone to
> check out the colour match. Several of us looked at the sample and
> as I say were impressed with the results.
>
> No interest - just passing on what I saw.
>
> Rick
>
<http://home.ptd.net/~mgrick/council.htm> Home page of the MG Council of
North America
<http://www.geocities.com/motorcity/9945>
|