When I did it, I actually used a 20cc syringe and some twist on tubing.
Same method as John. Pull from bottle, push in tranny. Slow but effective.
Not too messy, either. I use the same method for filling the ZS dashpot.
From: John Steczkowski [mailto:stecz@Crossroads.com]
Sent: Monday, April 19, 1999 9:55 AM
To: 'Mike Venables'; firstname.lastname@example.org
I just changed my fluid and I used a hand pump. It looks like a giant
syringe. You suck the fluid out of the bottle and then pump into into the
tranny, it was a little messy, but not too bad.
Director of Software Engineering
Crossroads Systems, Inc.
> -----Original Message-----
> From: Mike Venables [mailto:email@example.com]
> Sent: Monday, April 19, 1999 6:34 AM
> To: firstname.lastname@example.org
> Bill with the tired hands wrote...
> <<<So, does anyone have a really simple design for a device
> for refilling the transmission? >>>
> Here's an idea which might work. Get a longish, fexible tube, put
> one end in the filler hole, the other into a funnel. Hold the funnel
> next to the car and lift the funnel higher than the filler hole and
> pour in the oil. It should run into the 'box but probably very
> Must say, I've never tried it (I've got a '73 B) but the theory
> sounds okay.