mgs
[Top] [All Lists]

Re: I screwed up my cam bearings

To: hoops@owt.com
Subject: Re: I screwed up my cam bearings
From: REasterby@aol.com
Date: Sun, 30 May 1999 10:06:13 EDT
The bearing surface normally is not machined, the line bore would be done to 
the block and properly sized bearings inserted into the bores. Sounds like 
your bearing size was not matched to your cam bearing surfaces. Good Luck 
Ray Easterby
72 BGT orig own
88 XJ40
89 Corolla GTS 

<Prev in Thread] Current Thread [Next in Thread>