Panels I have bought in the UK contain that very statement on a label stuck
to the item.
PaulH.
http://freespace.virgin.net/paul.hunt1/
-----Original Message-----
From: BMack <bmack99@home.com>
To: Calvin Krug <ckrug@laf.cioe.com>; mgs@autox.team.net
<mgs@autox.team.net>
Date: 20 July 1999 08:50
Subject: RE: reproduction fenders
>Here is Kelvin's responce to the comments:
>
>"Other supplied sheetmetal such as BMHT panels are coated in a thin
>topcoat. This is for rust prevention in transit and storage ONLY!! This
>coating is not suitable as a primer as it is not porous, or designed for
>good adhesion. These panels should be stripped to bare metal before
>painting and primed with a suitable bare metal primer
|