mgs
[Top] [All Lists]

Re: engine number plate

To: rsexson@excite.com
Subject: Re: engine number plate
From: Tim Nagy <nagy@duq.edu>
Date: Mon, 26 Jul 1999 12:12:25 -0400
drill out the rivets with a 1/8 bit.  After removing 1, put a nail or
something in the plate through the hole, so when you drill out the
second, it down't spin around like a fan.

try to use a good sharp bit.

Tim

rsexson@excite.com wrote:
> 
> How is the engine ID number removed with the least amount of damage? It
> looks as if it is held in place by rivits.
> 
> R. Sexson
> 
> 74.5 B
> 
> Get FREE voicemail, fax and email at http://voicemail.excite.com
> Talk online at http://voicechat.excite.com

<Prev in Thread] Current Thread [Next in Thread>