mgs
[Top] [All Lists]

Re: Clutch version 2.01/sugg

To: HLUB34A@aol.com
Subject: Re: Clutch version 2.01/sugg
From: Carl French <cfrench@cybertours.com>
Date: Fri, 06 Aug 1999 22:05:45 -0400
HLUB34A@aol.com wrote:
> 
> You have no pedal pressure....are there any leaks in the system...is the
> reservoir topped up?
> 
> for some reason, the seals are not keeping fluid from seeping around them.
> Hydraulic systems work on the basis of a seal fitting tightly against the
> sides of the bore and pushing the fluid to its destination. can you
> disconnect the slave and work the piston? Try bleeding the slave first, they
> like to hold air and lots of it.
> 
> Valerie Stabenow, mga, tr4a, xk-e, tr6
I am going to start at the slave and work my way up. I may not have
rebuilt the slave right (it was about 3am then). I had thought of
prefilling the pipe also thinking that there was an enormouse amount of
air in the system
Carl French
Thanks for the reply.

<Prev in Thread] Current Thread [Next in Thread>