>The temperature meter still does not work. With the engine running there
was
>no resistance measured - so I'll replace the sensor.
Did you give it time to warm up? Did you short the sensor to ground and see
the gauge move?
>The fuel gauge does not give a sign as well.
>Although it works - tested with shortly grounding the wire which leads to
>the tank sensor - it does not move when connected.
>It reads about 450 ohms to ground.
>Is this normal?
Did you short the ground and gauge terminals on the tank transmitter and get
gauge movement? If not it could be a bad ground at the transmitter. Have
you got enough fuel in the tank to register?
PaulH.
MG Cars Webring MG Site of the Month - September '99
http://freespace.virgin.net/paul.hunt1/
(or if that URL doesn't work try )
(http://194.168.54.52/paul.hunt1)
|