Interesting article Ed, I've been looking for source for the Posidriv bits
since I learned they existed (recently). I wondered why my phillips
buggered the screw heads on most of the screws in my MG (especially after 28
years of removing some of them).
Dave 72 B
-----Original Message-----
From: JustBrits@aol.com <JustBrits@aol.com>
To: spridgets@autox.team.net <spridgets@autox.team.net>;
healeys@autox.team.net <healeys@autox.team.net>; mgs@autox.team.net
<mgs@autox.team.net>; mg-t@autox.team.net <mg-t@autox.team.net>
Date: Sunday, April 23, 2000 11:02 AM
Subject: PoziDrive !
>Folks:
>
>I have put up on my site two page written by Norman Nock and a tool page
>regarding all about PoziDrive fasteners for your info.
>
>Norman's article is about 3rd generation and a fax to boot so I had to
>display kind large which actually helped with the diagrams. I left the tool
>page same size for same reason.
>
>Sorry, but I have just not had time to make "links" on main page nor from
one
>to the other. It was enough of a PITA for this BASIC beginner, as is<G>!!
>
>Still, better than "nada"!!
>
>Cheers...........
>
> Ed
>
>http://www.justbrits.com/pozdriv1.htm
>http://www.justbrits.com/pozdriv2.htm
>http://www.justbrits.com/pozdriv3.htm
>
|