mgs
[Top] [All Lists]

Re: Compression Numbers

To: "kcmgb" <kcmgb@kc.rr.com>, <mgs@autox.team.net>
Subject: Re: Compression Numbers
From: "Paul Hunt" <paul.hunt1@virgin.net>
Date: Mon, 8 May 2000 20:57:42 +0100
>From the workshop manual:

18G, GA, GB, GF, GH, GJ, GK, 18V 584Z, 585Z, 672Z, 673Z = 160 HC (8.8) 130
LC (8.0)
18V 1972 on = 160 (LC comp ratio quoted (8.0)!)
18V581F & Y, 582F & Y, 583F & Y = 170 (only figure given but HC (9.0) and LC
8.0) comp ratios given!)
18V to ECE15 = 170 to 190 (HC only (9.0))
18V779F, 780F, 846F, 847F to ECE15 = 170 (HC only)

These figues have been given and queried before, but it's what the book
says.

PaulH.

----- Original Message -----
From: kcmgb <kcmgb@kc.rr.com>
To: <mgs@autox.team.net>
Sent: Sunday, May 07, 2000 10:43 PM
Subject: Compression Numbers


> What is a good compression reading for each cylinder on a fresh, strong ,
> good MGB 1800 5 main motor? and what was it NEW from the factory? I have
> looked on the net and tryed to find this out in books but have come up
with
> zip. Can anyone help?
>
>


<Prev in Thread] Current Thread [Next in Thread>