mgs
[Top] [All Lists]

RE: Two steps forward, one step back

To: "'mgs@autox.team.net'" <mgs@autox.team.net>
Subject: RE: Two steps forward, one step back
From: Steve Shoyer <Steve@shoyer.com>
Date: Sat, 20 May 2000 21:11:31 -0400
You can try cutting a slot in the shear bolts (Dremel?) and use a flat blade
screwdriver to remove them.  If all you really need is the electrical part
for the ignition switch, you can get that separately from the lock mechanism
and it's a very simple replacement.

--Steve (1980 NGB)

-----Original Message-----
From: Geoffrey Gallaway [mailto:geoffeg@sloth.org]
Sent: Saturday, May 20, 2000 6:03 PM
To: mgs@autox.team.net
Subject: Two steps forward, one step back

... It looks like
removing and replacing the assembly is very easy. I simply drill out the
old shear bolts and the entire assembly should pop off....

<Prev in Thread] Current Thread [Next in Thread>