Anybody have experience of Bill Hirsch's gas tank stuff or engine paint??
He is advertised a lot in Hemmings but that does not mean it's good!!
At 09:41 AM 8/18/00 -0400, Brian Warmuth wrote:
>Walt: Common problem is stopping "flash" rust after taking to bare
>metal. Try using various preparatons sold at body shop supply
>places...there is a 3-M product I use called "metal-prep" also a similar
>(but stronger) product called "metal-clean" which works well. It coats
>the bare metal with a phosphate coating which stops (at least for a
>brief time) flash rusting. Do try to keep the metal as dry as possible
>after treatment, until painting/priming.
>
>I also recommend using an Epoxy (two-part) primer like PPG's "DP-40" or
>similar product. You can also thin it differently and use as a sealer
>if you want.
>
>Just my .02 Standard disclaimers, no financial interest, etc...just
>good products in my experience.
>
>Brian Warmuth
>
>
Regards
Barrie Robinson
barrier@bconnex.net
|