mgs
[Top] [All Lists]

RE: Rubber bushings for MG Magnette

To: "'Wetmgs@aol.com'" <Wetmgs@aol.com>
Subject: RE: Rubber bushings for MG Magnette
From: "Dodd, Kelvin" <doddk@mossmotors.com>
Date: Tue, 5 Sep 2000 13:32:32 -0700
Marc:

        Upper outer are same as MGB 8G621    (282-310)  4 reqd.
        Lower inner and outer are same as Big Healey  ACB9274  (021-187) 8
reqd.

        Upper inners are similar to a MGB lower inner bushes, but the larger
diameter is cup shaped.  I was planning on getting some MGB poly bushes and
dome them with a sharp knife.

        I am planning on faking the tie bar bushes by using TR6 poly shock
mounting pads.  They look like they will work.


Good luck

Kelvin.

> -----Original Message-----
> From: Wetmgs@aol.com [mailto:Wetmgs@aol.com]
> Sent: Tuesday, September 05, 2000 1:00 PM
> To: mgs@autox.team.net
> Subject: Rubber bushings for MG Magnette
> 
> 
> Does anyone have a source for front suspension rubber 
> bushings for 53 to 58 
> Magnette?
> 
> Marc Derenzy
> 

<Prev in Thread] Current Thread [Next in Thread>