Connecting rod bearings

[Carl Elliott <grunt2@adelphia.net>]

I picked up a partly assembled engine. It has been bored the crank is
installed with new bearings. Pistons came with new rings and several
sets of bearings.
I mike the crank at 1.885 What size bearings .010 under , .020 under
There were boxes of  .010, .020, and .030., My shop manual is in very
poor shape and I can't read the specks. I know buy a new manual . I will
order one tomorrow.
Also what is the clearance .001 if I remember, and Torque on nuts 30-35
ft. lbs
All help appreciated.  Carl E.