mgs
[Top] [All Lists]

Re: carb float o-ring gasket

To: "David Councill" <dcouncil@imt.net>, <mgs@autox.team.net>
Subject: Re: carb float o-ring gasket
From: Paul Tegler <ptegler@cablespeed.com>
Date: Mon, 5 Mar 2001 22:08:28 -0500
Go into your local neighborhood large hardware chain
(east coast Home Depot) store. I found matching sizes
Close enough anyway)  square cross-section o-rings in
the facet department.
They're all usually made out of neoprene these days.

Paul Tegler      ptegler@cablespeed.com
www.teglerizer.com

----- Original Message -----
From: "David Councill" <dcouncil@imt.net>
To: <mgs@autox.team.net>
Sent: Monday, March 05, 2001 6:57 PM
Subject: carb float o-ring gasket


> Is there a source for the rubber gasket on the bottom of
the float bowl on
> the SU HS carbs? Or maybe a specific size o-ring if the
flat round rubber
> gasket is unavailable? My Moss catalog does not show these
rubber rings.
>
> David Councill

<Prev in Thread] Current Thread [Next in Thread>