mgs
[Top] [All Lists]

Re: Distributors - 25D/45D

To: "Neil Cotty" <neilc@apphosting.com>,
Subject: Re: Distributors - 25D/45D
From: <paul.hunt1@virgin.net>
Date: Thu, 15 Mar 2001 16:10:55 -0000
If you set the gap to .015, then measure the dwell, that will tell you.  The
points gap is the same for both types.  Personally because adjusting in situ
is such a pig (particularly on the RHD) I take it out and set it by gap, and
use dwell just as a check at following services.

PaulH.

----- Original Message -----
From: Neil Cotty <neilc@apphosting.com>
To: 'MG Mail list' <mgs@autox.team.net>
Sent: Thursday, March 15, 2001 12:31 PM
Subject: Distributors - 25D/45D


> Hi all,
>
> A friend of mine recently bought a 45D, remade into a 25D for his 64B.
This is
> in the UK. Can someone tell me if the shaft they use is from a 45 or a 25
as
> it affects the dwell. The dwell is 60 for the earlier models and 51 (ish
can't
> recall exactly) for the 45. Anyone know off hand?

///
///  mgs@autox.team.net mailing list
///  (If they are dupes, this trailer may also catch them.)


<Prev in Thread] Current Thread [Next in Thread>