> Yesterday Justin (our son), and I began to check the B and prepare
> for the major task. First thing I wanted to do was to check the
> compression, before tearing apart the engine. The compression check
> shows 150-155 lbs on all four cylinders. Since the spec in my shop
> manual says compression should be 130 lbs, I'm assuming 155 lbs is
> good. Can there be too much compression?
>
> Michael and Justin
High compression could be carbon build up or an inaccurate gauge. I'd check
the gauge first.
Bill
_______________________________________________________
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|