Re: cylinder head studs

[David Woerpel <dwoerpel@wi.net>]

Barney Gaylord wrote:

> Also check to be sure the threads on that end of the stud are not too long,
> so the manifold stud does not extend so far into the head as to foul the
> head studs (like set screws), which occasionally causes severe
> consternation for an unsuspecting mechanic later trying to remove the
> cylinder head.
>

Amen to that!

Dave  (older and definitely wiser)
59 MGA 1500
59 :{)

///
///  mgs@autox.team.net mailing list
///  (If they are dupes, this trailer may also catch them.)