This sounds interesting. Will I be able to close off each valve individually
by doing this? It should get quiet when I put in the feeler gauge, right?
Thanks
----- Original Message -----
From: "mghirsch" <mghirsch@netzero.net>
To: <mgs@autox.team.net>
Sent: Monday, October 22, 2001 11:20 AM
Subject: Re: valve setting
> If you have the valve cover off, and insert a thin feeler gauge between
the
> rocker arm and the valve stem with the engine running, you can isolate any
> noisy valves, and if neccessary make an adjustment.
>
> Maynard Hirsch
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|