mgs
[Top] [All Lists]

RE: Heater switch and fan.

To: schultejim@prodigy.net, Mgs@autox.team.net
Subject: RE: Heater switch and fan.
From: Duinhoven_Hans@emc.com
Date: Mon, 5 Nov 2001 09:02:37 -0500
This switch is prone to not working when dirt has collected into it.
Best is to open the switch carefully - remove the rocker. This can be done
by prying a screwdriverblade on one of the sides. 
Carefully collect all parts and have these cleaned thoroughly.
Before reassembling have the moving internal parts greased lightly.
Have the switch moved in one go - and you'll hear the internals clcik again.

Good luck!

Cheers,

Hans

'71 BGT

-----Original Message-----
From: James Schulte [mailto:schultejim@prodigy.net]
Sent: Friday, November 02, 2001 4:05 AM
To: Mgs@autox.team.net
Subject: Heater switch and fan.


Hi gang,
I think I have a bad heater switch and a bad fan for the 70B. I'm using 
a test light to check this so stick with me. I get power from the double 
green wires on post 1 of the switch when I turn the ignition on. When I 
flip the switch to on , no power transfers to post  2 or 4 on the 
switch.  If I jump the switch  and connect the green and the 
green/yellow wires, I get power to the fan but the fan doesn't run.  I 
disconnected the ground wire from the fan and tried to ground that wire 
to a body bolt that was unpainted.  No luck.  I conclude that the fan is 
bad and the switch is bad.  Am I right or is it another problem I'm missing?
TIA
Jim
70B
78B

///
///  mgs@autox.team.net mailing list
///  or try http://www.team.net/cgi-bin/majorcool
///


<Prev in Thread] Current Thread [Next in Thread>