Ah... Completely remove it, give the lugs and where they bolt up to a good
clean to shiny metal, and reassemble with some agent such as copper grease,
dielectric grease or Vaseline.
----- Original Message -----
From: "S Twigg" <seanan@crosslink.net>
To: "'Telewest (PH)'" <paul.hunt1@blueyonder.co.uk>
Cc: <mgs@autox.team.net>
Sent: Monday, June 03, 2002 10:54 AM
Subject: RE: Starter Quandary
>
> Sounds like that might be the problem. Both the accelerator (melted a
> bit of the outer covering) and heater cables are getting hot. I'll
> check the strap, it did look ok, but visual checks can be deceiving.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|